KF-4600
Vertical Machining Center
The Vertical Machining Center KF Series, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining rigidity and accuracy.
The Fastest, the Most Versatile High end Linear Machining Center
- Diverse spindle structure (direct-connection: 8K, 12K; built-in: 15K)
- Increases strength through structural analysis
- Expands machining domain with y-axis 460mm design
- Shortens not-cutting time with rapid feeds (36/36/36m/min.)
- Mould packages for optimum mould manufacturin
Nogen spørgsmål?
High Speed & Productivity
Travel (X/Y/Z)
36/36/36 m/min
35.4/18.1/20.5 inch
Rapid Traverse Rate (X/Y/Z)
900/460/520 mm
1,417/1,417/1,417 ipm
2
Table
3
ATC & Magazine
Tool Change Time (C-C): 3.2 sec
1
Direct Driven Spindle
By connecting the motor directly to the spindle acc/ dec time was shortened. A wide range of machining can be done with spindle speed of up to 12,000rpm.
Built-in Spindle
The 15,000rpm built-in spindle can minimize vibration transmitted to the spindle. It allows excellent machining performance in mold and high-precision products.
Direct Driven Spindle
8K(β), 8K, 12K
Built-in Spindle
15K
Standard for Thermal Deformation Compensation(Sensorless)
4
Optimal Structural Analysis
KF4600 is designed to have optimal structure through Hyundai WIA’s unique structural analysis. In particular, even with heavy cutting increases the rigidity of the bed and column, excellent performance.
KF4600 Rigidity
X Axis Compared to the previous model
186% UP
Y Axis Compared to the previous model
158% UP
Z Axis Compared to the previous model
179% UP
High-Precision & Speed Vertical Machining Center
Expanded X-axis Design
The X-axis travel is increased to 900mm(35.4″) and machining area has been enhanced.
Double anchored ball screw
The precision preloaded ball screw minimizes the expansion and contraction according to the heat and further reinforces the rigidity by the double anchor support method. In addition, the coupling of the ballscrews and the highly reliable digital servo motors are connected by metal plate couplings, and coupling breakage and backlash are reduced.
One Piece High Column Structure (8K, 12K)
If you apply an one piece high column with an optional, you cand extend the height of the z axis up to 200 mm (7.9″).
KF4600 (A~B)
Distance from Table Surface to SP
150~670 mm
Distance from Table Surface to SP
5.9~26.4 inch
KF4600 High Column (A~B) OPTION
Distance from Table Surface to SP
350~870 mm
Distance from Table Surface to SP
13.8~34.3 inch
High-Speed Roller LM Guideway
Rapid Traverse Rate 36/36/36 m/min
(X/Y/Z) (1,417/1,417/1,417 ipm)
High-Performance, Direct Driven Spindle
Spindle Cooling (12K Std.)
The spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability.
Dual Contact Spindle
The Big Plus spindle system (BBT40) provides dual contact between the spindle face and the flange face of the tool holder.This greatly increases tool rigidity, reduces run out and adds significant productivity to machining applications.
– Tool Lock Type : Hydraulics Through Spindle Coolant OPTION
Through Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.
20 bar / 30 bar / 70 bar
(290 psi / 435 psi / 1,015 psi)
8,000 (β) rpm
Max. Output
18.5 kW 24.8 HP
Max. Torque
118 N.m 87 lbf・ft
8,000 rpm
Max. Output
15 kW 20.1 HP
Max. Torque
286 N.m 210.9 lbf・ft
12,000 rpm
Max. Output
18.5 kW 24.8 HP
Max. Torque
118 N.m 87 lbf・ft
